Summits manufature World Class Refrigerated Air Dryers with most advanced technology and reliability to ensure trouble free performance for ages.

Summits Refrigerated Air Dryers remove the moisture to a level of 600 ppm(w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of therefrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, evaporator and moisture separator) are integrated into one single unit.
Heat Exchanger:
3-in-1 integrated high-efficiency microchannel heat exchanger with optimized construction designed with ANSYS CFD. Generously sized Air to Air heat exchanger reduces the load to the evaporator section to 1/3 of total load hence less power consumption. The stainless steel demister pad packed inside the heat exchanger efficiently removes the condensed moisture at all varying airflow.

eSave controller:

Energy saving control algorithm incorporated

Service interval indication

RS 485 communication

Can be programmed to user requirement

High and Low dew point alarm can be set

Energy saved & Money gained can be accounted S. On line dew point transmitter can be connected

Password protected settings

How refrigerated air dryers work?

• The wet air enters into the economiser (pre-cooler) of the Refrigerated Air Dryer and the temperature gets reduced significantly by the outgoing cold air.
• This medium temperature air further enters in to the evaporator of the Refrigerated Air Dryer and the temperature drops to 2ºC by the cold refrigerant.
• At this temperature the moisture in vapour form condenses into liquid and the same is separated by highly efficient integral moisture separator and sent out through an automatic drain trap.
• The Dry cold air from evaporator enters the pre-cooler and exchanges the heat from the incoming hot wet air.
• The Dry Air similar to inlet air temperature leaves the pre-cooler and it is the output from the Refrigerated Air Dryer used for the applications.